HZ02Z Anchor Fixing Systems
AXO4 Body Anchor Fixing Systems
HA04 L Anchor Fixing Systems
Stone Fixing System
Quick and Easy to install fixing system for beautiful looking natural stone facades
Stone Fixing systems need to accommodate all types of backing walls whether they are concrete walls, block work & masonry walls or steel structures.
The following points are taken into consideration when designing a fixing system for natural stone installation.
- Stone dimensions.
- Cavity structure: projection size and isolation.
- Application type: horizontal or vertical joint installation.
- Joint size.
- Structural wall backing.
- Height of facade.
- Relevant dynamic loads such as wind and seismic loads.
- Design criteria of the project.
HAZ Metal proposes and specially designs fixing systems according to individual project requirements.
Direct fixing to concrete walls with expansion bolts
Fixing concrete with expansion bolt anchors using expansion bolts. Insulation is cut at each anchoring point.
Direct fixing to concrete or masonry walls with mortar
Fixing to concrete with mortar anchors using mortar. Insulation is drilled at each anchoring point.
HZ Z Anchor Fixings
- Fixing to concrete with bolts.
- Projection sizes up to 135 mm.
- Recommended for loads up to 800N.
- Installation at horizontal or vertical joints
AXO Body Anchor Fixings
- Fixing to concrete with bolts.
- Projection sizes up to 260 mm.
- Recommended for loads up to 1300 N.
- Installation at horizontal or vertical joints.
- Optimum static performance.
HA L Anchor Fixings
- Fixing to concrete with bolts.
- Can be used for 50 mm and larger stone thicknesses.
- Various types to enable adjustability.
- Installation at horizontal joints only
HSD Mortar Anchor Fixings
- Fixing to masonry with mortar.
- Various types to fit a range of load and projection sizes.
- Installation at horizontal or vertical joints.
- Three dimensional adjustability.
